1
Product Center
continous laser welder
- Product Description
- Advantages
- Parameter
- Applications
-
Welding Samples
Pull Test
Partner
Product Description
Fiber laser is mainly composed of pump source, coupler, rare earth doped fiber, resonator and other components. The pump source is composed of one or more high-power laser diode arrays. The pump light emitted by the pump source is coupled into the rare earth element doped fiber as the gain medium through a special pump structure. The photons at the pump wavelength are absorbed by the doped fiber medium to form a particle number inversion. The stimulated light wave forms a laser output through the feedback and oscillation of the resonant cavity mirror.
WW2000-F-T
W3000-F-T
01 accurate D / a conversion, effectively inhibiting splash
Accurate D / a conversion and digital control of analog quantity make the nugget temperature rise continuously. At the same time, accurate current rise slope and time control will not cause heat jump and splash due to inability to control current rise time
02 peak power, high aspect ratio can be obtained, and high reverse materials such as copper and aluminum can be processed
The optical fiber core diameter can be selected from 20um to 50um. According to the power density formula, it can reach 10 times of the power density of ordinary optical fiber, which greatly improves the feasibility of welding high reflection materials.
03 up to 30% electro-optic conversion efficiency, economic and environmental protection;
QCW laser belongs to the category of fiber laser. The electro-optical conversion efficiency can be as high as more than 30%, which is much higher than the traditional YAG fiber conduction laser. It saves points and environmental protection, and greatly reduces the power consumption for long-term use,
04 flexibility of beam waveform
Single mode or multimode output mode can be selected for QCW fiber laser. In order to cut very thin materials or applications requiring small spot size, single mode will be the appropriate choice. However, most high-power applications use flat top light or multimode mode (see Figure).
Core Component imported configiguration
Customized Project introduction
01 customer background and pain points
Amphenol, a US funded enterprise, is an early manufacturer of communication devices and acoustic devices. It mainly focuses on injection molding, punching and welding. Most of the materials are copper. It is necessary to weld 0.1mm thick shrapnel and 0.8mm diameter copper column to increase the strength. The problems encountered are:
1. The welding efficiency is particularly low: the original process is single-sided and single point, and only one welding point can be welded at a time, so the efficiency is low;
2. The welding strength is not up to standard: the material is copper alloy and the size is too small, resulting in poor welding fastness;
The customer is very distressed about the above two points and has been unable to find a solution.
02 customers have high requirements for equipment
Amphenol found us online on October 16, 2019, discussed with our sales project engineer and wanted to customize the welding machine with the following requirements:
1. Improve welding efficiency;
2. Reduce the repair times of fixtures;
3. The welding efficiency shall be increased by 50% on the original basis;
4. The yield should be increased by 30% on the original basis;
5. Solve the problem of welding instability;
According to the requirements of customers, the existing standard spot projection welding machine can not be realized at all. What should we do?
03 the customer developed and customized w150-f-j quasi continuous laser welding machine according to the customer's requirements
According to various requirements put forward by customers, the company's R & D department, welding process department and sales department jointly held a new project R & D meeting to discuss the process, fixture, structure, feeding mode and configuration, list the key risk points, make solutions one by one, and determine the basic direction and technical details as follows:
1. Workpiece proofing test: Rayon welding technologist made a simple fixture for proofing at the fastest speed. We used our existing medium frequency welder for proofing test. After 5 days of back and forth test and drawing test, the welding parameters were basically determined;
2. Equipment selection: the R & D Engineer communicated with the welding technologist, calculated the selection power according to the customer's requirements, and finally confirmed it as w150-qcw-j2 earphone double head spot welder;
3. Stability of equipment: our company adopts "imported configuration" of all core components;
4. Equipment advantages:
1) The double head automatic spot welder we choose can weld two spots at one time, which is more than 50% higher than the original single spot efficiency;
2) We have selected special electrode materials to solve the phenomenon of burst point, with high yield, stable solder joint and high strength, which can reach the strength of base metal. After welding, the solder joint can be directly pulled through the base metal;
3) Easy to operate, ordinary workers can operate without professional welders, saving labor costs.
4) With automatic displacement tooling, the welding efficiency can be increased by 50% on the original basis;
5) Using double vibrating lens welding, the yield is high, which can be increased by 30% on the original basis;
5. Delivery date: 25 working days.
05 to meet your customized needs is the mission of rayon's sustainable development
Customer base is our orientation,
What material do you need to weld?
What welding requirements? What welding process?
Do you need fully automatic, semi-automatic or assembly line?
Please feel free to ask any questions. Rayon can "customize R & D" for you.
Customer cases
Amphenol earphone laser welding production line
Battery lug automatic welding machine
Medical instrument laser welding machine
R&D CUSTOM PROCESS
Professional and considerate service, accompanied by radium Yang all the way!
Service System
Radium Yang's service team of more than 20 people, 24h*7service online, 8h service home, lifelong maintenance!
After sales engineers go to the factory for installation and commissioning free of charge, hand-in-hand training, and escort you!
GROUPED EQUIPMENT
Pressure detector
Laser power meter
tensimeter
-
1. Miniaturization, precision and high integration;
2. Adjustment free, maintenance free and high stability;
3. Competent for harsh working environment, with high tolerance to dust, shock, impact, humidity and temperature;
4. High electro-optic efficiency: the comprehensive electro-optic efficiency is more than 20%, which greatly saves the power consumption and operation cost;
5. High power;
6. Excellent beam quality.
-
Model
W1000-F-T
W2000-F-T
W3000-F-T
W6000-F-T
Average Power
1000W
2000W
3000W
6000W
Wavelength
1070nm
Laser Model
Optical fiber Repetition Rate
continuous
Welding Depth
1.5mm
2.0mm
3.0mm
6.0mm
Cooling
water-cooling water-cooling water-cooling water-cooling Power Supply
3500W(two phase)
7000W(two phase)
10000W(two phase)
20000W(two phase)
Voltage Supply
220V±10%
380V±10%
380V±10%
380V±10%
-
Medical devices, consumer electronics industry, sensor parts, aerospace, new energy lithium batteries, fuel cells and other precision products
Automobile parts (flywheel disc, large clutch, gear, automobile motor, parts requiring high strength), battery busbar (thickness ≤ 2mm, material: aluminum), pressure vessel, butt welding of all metal parts (penetration ≤ 5-5.5mm steel parts, penetration ≤ 4mm aluminum parts), penetration welding of all metal parts (penetration ≤ 3mm steel parts, penetration ≤ 2mm aluminum parts)
Toflylaser is a professional manufacturer of laser equipment and automated systems. Guided by our philosophy of “Earning Trust Through Responsibility, Pursuing Development Through Innovation,” we are committed to delivering stable, efficient, and energy-saving laser automation solutions!
Quick Navigation
> About Us
> Laser Welding Machine
>Laser Cutting Machine
> Laser Cleaning Machine
Contact Us
Address: Building 10, Xinghua Industrial Park, No. 2 Shuangma Street, Suzhou Industrial Park
Follow Us
Scan to inquire
Mobile App
Our main products include: laser marking machines, laser cutting machines, laser etching machines, medical device laser welding machines, fuel cell laser welding systems, laser cleaning machines, laser welding machines, laser brazing machines, robotic laser welding machines, and laser welding robots.